Scopes, factors and calculations: questions answered
Pick the question closest to yours.
- Why do the Bureau of Energy Efficiency (BEE) Odisha sponge iron reports for 25, 40 and 60 horsepower crusher motors print three different carbon dioxide (CO2) factors?
- Why do the Bureau of Energy Efficiency (BEE) Solapur reports pay back a new 200, 400 or 600 kilogram an hour wood boiler in 3.7, 2.8 and 1.1 years?
- Why do the Bureau of Energy Efficiency (BEE) Solapur reports show solar water heaters of 500, 1,000 and 2,000 litres a day (LPD) paying back in 2.1 to 2.8 years?
- Why do the Bureau of Energy Efficiency (BEE) Surat reports for 1.5 and 2.5 kilolitre drain heat recovery print different paybacks and carbon dioxide (CO2) per tonne of coal?
- Why do the Bureau of Energy Efficiency (BEE) Surat reports show a new 6 or 7 chamber stenter paying back in 2.5 to 2.6 years?
- Why do the Bureau of Energy Efficiency 2 megawatt and 4 megawatt sponge iron waste heat power reports show the same flue gas heat?
- Why do the Bureau of Energy Efficiency Bhubaneswar reports for 30, 60 and 100 kg brass reheating furnaces show different charcoal savings per kg of brass?
- Why do the Bureau of Energy Efficiency Ganjam individual drive reports for 1, 1.5 and 2 tonne an hour rice mills use the same motors?
- Why do the Bureau of Energy Efficiency Jodhpur gasifier reports cost the same 62.7 lakh rupees for a 15 and a 30 tonne a day lime kiln but save 25 and 49 lakh?
- Why do the Bureau of Energy Efficiency Jodhpur insulation reports for 15, 30 and 50 tonne a day lime kilns print different savings for the same job?
- Why do the Bureau of Energy Efficiency Jodhpur lime motor reports pay back in 21 to 25 months in the summary but 2.1 to 2.6 years in the text?
- Why do the Bureau of Energy Efficiency Surat reports pay back a new 3 or 4 tonne an hour boiler in 5 to 7 months?
- Why do the Bureau of Energy Efficiency Vellore rice mill reports show no carbon saving for a husk boiler but hundreds of tonnes for a wood-saving dryer?
- Why do the electricity carbon dioxide (CO2) lines in four cluster profiles from The Energy and Resources Institute (TERI) imply grid factors from 0.735 to 0.986 kg per kilowatt hour?
- Why do the two Bureau of Energy Efficiency (BEE) Solapur economiser reports, one titled boiler and one thermic fluid heater, save 38 and 30 tonnes of wood?
- Why do two carbon reports for the same factory and year show different totals?
- Why do two carbon tools give different Scope 3 totals for the same purchase data?
- Why does a GHG verifier check invoices around the year end?
- Why does a litre of diesel make about three times its own weight in carbon dioxide (CO2)?
- Why does condensate go cold on its way back to a Panipat boiler, and what does a pressure powered pump save?
- Why does one Indian cluster profile print about 1,030 kilocalories per kilogram for a tunnel kiln and another 1,740?
- Why does our verifier want to compare production data with our GST returns?
- Why does the 120,000 kilocalorie gas hot air generator pay back in 1.02 years and the 60,000 in 2.35 in the Bureau of Energy Efficiency Ahmedabad reports?
- Why does the 36 kW electric bogie annealing furnace in the Bureau of Energy Efficiency Jagadhri reports use more power per tonne of brass than the 60 kW one?
- Why does the Alwar manual give two very different kilowatt hour savings for efficient motors?
- Why does the Bureau of Energy Efficiency (BEE) Solapur report for 8 rapier looms print a power saving of 4,680 kilowatt hours when the 4 loom report prints 18,720?
- Why does the Bureau of Energy Efficiency (BEE) Surat report for a 250 kilogram jet machine pump pay back in 0.99 years when the 150 kilogram one takes 1.27?
- Why does the Bureau of Energy Efficiency (BEE) Surat report for a 60 kilowatt (kW) steam turbine pay back in 1.64 years when the 40 kW one takes 2.04?
- Why does the Bureau of Energy Efficiency (BEE) Tiruppur manual save 30% of wood in a compacting boiler but 16% in a dyeing boiler?
- Why does the Bureau of Energy Efficiency 200 tonne biomass gasifier report pay back in 0.99 years when the others take 2 to 3?
- Why does the Bureau of Energy Efficiency 800 kilogram aluminium wood gasifier report pay back in 0.94 years when the 400 and 600 kilogram ones take about 1.7?
- Why does the Bureau of Energy Efficiency Bhimavaram 60 horse power ice plant motor report save more power than the 75 horse power one?
- Why does the Bureau of Energy Efficiency Godavari crusher motor report pay back in 1.38 years when the brick press motor of the same size takes 1.96?
- Why does the buy to fly ratio matter so much for an aerospace part's carbon footprint?
- Why does the Coimbatore bakery profile show electricity as 83, 310 and 206 kilowatt hours a year per unit?
- Why does the Hooghly cold storage energy profile say the cluster emits 0.8 million tonnes of carbon dioxide (CO2), when its own unit figures give about 0.08 million?
- Why does the Intergovernmental Panel on Climate Change give coal or wood up to thirty times more methane in one sector table than in another?
- Why does the Nagaur hand tools profile print 1,183 toe as both energy use and saving?
- Why does the payback of an efficient oil-fired brass pit furnace fall from 0.92 to 0.57 years across the Bureau of Energy Efficiency Jamnagar 150, 300 and 400 kg reports?
- Why does the Pune rubber cluster profile print 36,624 tonnes of carbon dioxide when today's factors give about 30,500?
- Why does the Ramnagar plastics cluster profile print 28,503 tonnes of carbon dioxide when today's factors give about 20,000?
- Why does the Surat manual measure a boiler at 36.3% but cost the new boiler against 60%?
- Why does the Vapi 600 kilogram boiler report save 63 tonnes of wood while the 400 kilogram report saves 49?
- Why does the verifier compare our purchase ledger with the fuel in our emissions report?
- Why is electricity most of a Penang semiconductor assembly plant's footprint, and how is it reported?
- Why is Indian primary aluminium so carbon-intensive?
- Why is Scope 2 so low for an apparel factory in Hawassa Industrial Park?
- Why should we keep a change log for our carbon inventory?
- Why would a big customer care about my small business's carbon?
- Why would a buyer ask only its biggest suppliers for emissions data, and is 80 percent of spend a rule in the Greenhouse Gas (GHG) Protocol?
- Will a servo stabiliser that holds an oil mill's lights at 210 volts save electricity, as the Alwar manual says?
- Will a verifier accept emissions figures read from invoices by software?
- Will an auditor accept carbon data that was extracted by AI?
- Will running a second shift lower our CO2 per unit?
- Will switching our Howrah foundry from cupola to induction furnace cut CO2?
- Wind or solar units banked with the DISCOM: in which month and year do I count them in Scope 2?