Scopes, factors and calculations: questions answered
Pick the question closest to yours.
- Which Bureau of Energy Efficiency Muzaffarnagar paper mill report saves most electricity: a bigger boiler fan, a bigger feed water pump or the process pumps?
- Which Bureau of Energy Efficiency report pays back fastest for a Varanasi brick kiln, zigzag firing, semi-mechanised or fully mechanised, and why do their carbon figures use different factors?
- Which Bureau of Energy Efficiency tube ice plant report saves the most in Bhimavaram: 10, 15 or 20 tonnes a day?
- Which Bureau of Energy Efficiency tunnel kiln report pays back fastest for a refractory unit: 10, 20 or 50 tonnes a day?
- Which Bureau of Energy Efficiency Warangal report pays back fastest for a rice mill that makes its own power from husk: 190, 290 or 1,000 kilowatts?
- Which carbon figure should an Indian fabricator use for steel coil bought from Hazira?
- Which carbon intensity metric should my business use: per tonne of product, per rupee of revenue or per employee?
- Which CEA grid emission factor version should I use for each reporting year?
- Which coal and char lab tests does a sponge iron kiln need for an auditable CO2 figure?
- Which coal heating value do the Surat manual and its boiler reports use: 4,100, 4,500, 5,800 or 6,000 kilocalories a kilogram?
- Which coke and coal records does a ferro alloy plant need for its carbon figure?
- Which dyeing machine uses the least energy per tonne of fabric: jig, winch, jet, beam, pad batch or continuous range?
- Which emission factor should we use for wire rod bought from a Hebei mill?
- Which emission factors should an Indian company use for its carbon inventory?
- Which emissions can a green hydrogen plant leave out of its 2 kg calculation?
- Which figure should an Indian buyer of UAE aluminium billet use for Scope 3?
- Which fuel emission factor do I use in Scope 3: combustion only or life cycle?
- Which fuel line of the Intergovernmental Panel on Climate Change fits a blend of light diesel oil and furnace oil, or a fuel oil whose density I do not know?
- Which fuel was cheapest for each unit of heat in Morbi in 2009, gas, lignite, coal or briquette, and does that still hold for me?
- Which fuels need methane and nitrous oxide counted, and when is a CO2-only factor enough?
- Which gases must Scope 3 cover, and what happens to biogenic CO2 from a supplier's biomass boiler?
- Which global warming potentials must a Verra project use for methane?
- Which grid emission factor do BEE's old project reports use for the CO2 saved?
- Which grid emission factor should a Bangladesh factory use?
- Which grid emission factor should a Kazakh supplier use?
- Which grid emission factor should a Malaysian supplier use?
- Which grid emission factor should a Mexican supplier use?
- Which grid emission factor should a Philippine factory use: Luzon Visayas, Mindanao or national?
- Which grid emission factor should a Saudi supplier use?
- Which grid emission factor should a Thai supplier use?
- Which grid emission factor should a Turkish supplier use?
- Which grid emission factor should a Vietnamese supplier use?
- Which grid emission factor should I use for my country's electricity, and how do I cite it?
- Which grid emission factor should we use for electricity at a supplier's plant in China?
- Which grid emission factor sits behind the carbon dioxide (CO2) lines in the 2017-18 cluster tables of The Energy and Resources Institute (TERI)?
- Which grid factor should a factory supplied by DVC or any one state utility use?
- Which grid factor should a South African supplier use for Scope 2?
- Which grid factor should an Indian group use for its overseas subsidiaries?
- Which heat values did The Energy and Resources Institute (TERI) use to turn Ahmedabad's chemical-cluster tonnes and cubic metres into tonnes of oil equivalent (toe), and do the lines add up?
- Which heat, cooling and vacuum utilities do Thane's solvent distillation, antioxidant, bulk drug and peroxide batches use, and what should I record for each?
- Which HSN codes identify refrigerant gas purchases for Scope 1?
- Which HSN codes on an invoice mean fuel for Scope 1, such as coal, coke, diesel, LPG and natural gas?
- Which Indian foundry clusters did the national energy study cover, and where does my foundry fit?
- Which Intergovernmental Panel on Climate Change (IPCC) methane factor fits my coal supplier's mine depth: low, average or high?
- Which Intergovernmental Panel on Climate Change carbon default should I use for plastic scrap from my moulding line that is burnt: 75 percent, 80 percent or 50 percent?
- Which Intergovernmental Panel on Climate Change coal line fits my coal: other bituminous, sub-bituminous or lignite?
- Which Intergovernmental Panel on Climate Change defaults turn a tonne of factory waste sent to a dump into methane: carbon content, site type and decay rate?
- Which Intergovernmental Panel on Climate Change factors apply if a clay carries iron, manganese or magnesium carbonates, not just limestone?
- Which Intergovernmental Panel on Climate Change fuel line do rice husk, sawdust, dung cake and charcoal fall under?
- Which is right for turning gas volume into energy: 25.2 standard cubic metres per million British thermal units, or 37,000 British thermal units per standard cubic metre?
- Which kinds of uncertainty does the Greenhouse Gas Protocol Corporate Standard say a company can measure, and is a change between two years more certain than the total?
- Which Korean renewable electricity options lower a supplier market based Scope 2?
- Which manure storage systems on a dairy farm give off nitrous oxide under the Intergovernmental Panel on Climate Change Tier 1 method, and how much per kilogram of nitrogen?
- Which melting furnace swap in the Bureau of Energy Efficiency Jamnagar manual pays back fastest on 200 tonnes of brass a year?
- Which meters come with a rooftop solar plant, who installs them, and is a generation meter compulsory?
- Which methane and nitrous oxide factor should I use for a liquefied petroleum gas forklift when the off-road table of the Intergovernmental Panel on Climate Change has no row for it?
- Which methane correction factor should a labour colony or company township use for pit latrines, septic tanks or a sewer in the Intergovernmental Panel on Climate Change method?
- Which methane factor should a kiln or dryer use: the general manufacturing figure or the kiln and dryer table in the Intergovernmental Panel on Climate Change guide?
- Which methane factor should petrol-driven off-road machinery use in the Intergovernmental Panel on Climate Change guide: two-stroke or four-stroke?
- Which module datasheet numbers should I check before accepting rooftop solar: tolerance, fill factor and temperature coefficient?
- Which of the Bureau of Energy Efficiency Morbi ceramic reports pays back fastest, and which saves the most rupees?
- Which of the four Bureau of Energy Efficiency fixes for a Jamnagar brass billet reheating furnace pays back first?
- Which of the nine Bureau of Energy Efficiency measures for Jagadhri brass and aluminium units pays back first?
- Which of the three Greenhouse Gas Protocol business travel methods should I use first, and what do I collect for each?
- Which precursors go into the CBAM figure for Indonesian stainless cold rolled coil?
- Which printed figures can you trust in the Bureau of Energy Efficiency (BEE) Odisha raw material preheating reports for 50, 100 and 200 tonne a day (TPD) sponge iron kilns?
- Which refrigerant should a new chiller or cold room use to stay ahead of the HFC phase-down?
- Which sampling methods does the GHG Protocol accept when I can't collect data from every supplier or site?
- Which Scope 3 categories actually matter for an IT services or BPO company?
- Which Scope 3 categories are mandatory to report, and can I leave some out?
- Which Scope 3 category does each GST SAC service code belong to?
- Which Scope 3 category holds recycling: the material I buy with recycled content, the waste I send for recycling, or the recyclable products I sell?
- Which scope covers ETP sludge a Vapi dye unit sends to a cement kiln?
- Which scope covers the common effluent plant a Vapi chemical unit pays for?
- Which scope do campus buggies and pickup vehicles fall in?
- Which scope does a chartered flight fall in?
- Which scope does rented equipment like a crane or forklift fall in?
- Which scope is electricity for my shop inside an airport terminal?
- Which shareholdings must go into Category 15, how do I count them from the investee's own inventory, and can I ignore small stakes?
- Which steel carbon figure should a Jamshedpur ancillary unit use for steel bought from the integrated mill?
- Which units do freight and storage emission factors come in for the distance-based method in the Scope 3 guidance, and what goes wrong if I multiply by the wrong one?
- Which uses of limestone and dolomite release carbon dioxide and which do not, according to the Intergovernmental Panel on Climate Change?
- Which year do goods in transit at year end belong to?
- Who can verify an ISO 14064-1 GHG inventory in India?
- Who counts the electricity for reefer containers plugged in at a port?
- Who counts the tugboat fuel when our ship berths at a port?
- Who in a small company should deal with the GHG verifier?
- Who in a small company should sign off the carbon figures before they go to a buyer or bank?
- Who reports freight emissions under FOB, CIF or ex-works: Category 4 or Category 9?
- Who reports the emissions of a plant run under a Mexican shelter or maquiladora arrangement?
- Whose scope is the electricity and cooking fuel at a construction labour camp?
- Why did my power factor drop and kVAh bill stay high after installing rooftop solar?
- Why do Bhubaneswar shrimp plants use about half as much electricity again per tonne as Veraval fish plants?
- Why do fuel volumes differ at 29.5 C and 15 C, and which should I use?
- Why do Jetpur's typical unit tables turn a month into a year by 9, 10, 12 or 6?
- Why do Morbi tile kilns not reuse their exhaust heat to warm the burner air when sanitary ware kilns can?
- Why do my refrigerant top-up records look low after I installed many new units?
- Why do some sources quote about 0.82 for India's grid emission factor?
- Why do Surat's per machine electricity figures of 0.012 to 0.019 kilowatt hours a metre not add up to a processing house's whole unit figure?
- Why do the Balasore and Ramnagar plastics cluster profiles print the same energy table?
Earlier questions · More questions