Scopes, factors and calculations: questions answered
Pick the question closest to yours.
- Is an oversized DG set wasting diesel, and how do I check its loading?
- Is annual renewable matching enough for a data centre, or does it need hourly matching?
- Is boiler blowdown heat recovery worth it, and how much CO2 does it save?
- Is buying from a local supplier always lower carbon?
- Is charcoal in a brass or forging reheating furnace really carbon free?
- Is chilled water bought from a district cooling plant Scope 2?
- Is coastal shipping lower carbon than road freight within India?
- Is diesel burned in a rented generator during load shedding our Scope 1 or Scope 3?
- Is diesel for an Agra footwear unit's generator Scope 1?
- Is diesel for our factory staff bus Scope 1 or Scope 3?
- Is diesel generator (DG set) power Scope 1 or Scope 2, and how do I calculate it?
- Is electricity 16% or 9.5% of Jetpur's textile cluster energy, and why is it 44% of the bill?
- Is electricity from a Nigerian cement plant's own gas turbines Scope 1 or Scope 2?
- Is electricity from a waste heat recovery system zero emission in my inventory?
- Is electricity used to charge company EVs Scope 1, Scope 2 or Scope 3?
- Is freight Scope 3 Category 4 or Category 9? Does it depend on who pays?
- Is fuel for company cars, employee-owned cars and taxis Scope 1 or Scope 3?
- Is grid-charged battery backup lower carbon than running a DG set during power cuts?
- Is induction cooking lower carbon than LPG in a factory canteen or hotel kitchen in India?
- Is insulating the thermopac dust collector worth it in a processing house?
- Is ISO 14064-1 the same as the GHG Protocol, and which one should my company follow?
- Is it acceptable to use rough Scope 3 data in the first year?
- Is it double counting if my supplier's Scope 1 also appears in my Scope 3?
- Is it worth moving my small factory from an LT to an HT electricity connection?
- Is it worth replacing a 10 to 15 horsepower (hp) cooling tower pump in a seafood plant with a multistage pump?
- Is LPG in India propane or butane?
- Is moving cargo on National Waterway 1 lower carbon than trucking it, and how do I calculate it?
- Is moving fuel by pipeline lower carbon than by tanker truck?
- Is my market-based Scope 2 total a net figure, and can I subtract avoided emissions from my solar plant?
- Is my tannery's energy use per tonne of raw hide high or low against European figures?
- Is power from a captive coal plant in an Indonesian industrial park Scope 1 or Scope 2?
- Is propane lower carbon than natural gas for a ceramic tile kiln?
- Is rail freight lower carbon than trucking in India, and by how much per tonne-km?
- Is replacing an IE2 motor with an IE3 or IE4 motor worth it, and how much CO2 does it save?
- Is sea-air freight via Dubai much lower carbon than direct air freight to Europe?
- Is site-mixed concrete higher or lower carbon than ready-mix concrete?
- Is steam bought from a common utility provider in a chemical park like Dahej Scope 2 or Scope 3?
- Is the AC gas a car workshop recharges counted in its Scope 1?
- Is the CEA grid emission factor CO2 only, and should I add methane and nitrous oxide?
- Is the coal dust (sea coal) in foundry green sand a Scope 1 emission, and how do I estimate it?
- Is the Greenhouse Gas (GHG) Protocol a law, and who has to follow it?
- Is the truck that takes my factory waste away counted in Category 5?
- Is the Vapi 4 lakh kilocalorie wood gasifier in the Bureau of Energy Efficiency report big enough for the oil burner it replaces?
- Is there a state-wise grid emission factor in India, and can I use a lower one for my state?
- Is there one table of Scope 3 formulas, activity data and emission factors by category?
- Is wood really cheaper than pet coke for the same heat in a Panipat textile unit?
- Jamshedpur's chemical units get 76% of their energy from biomass: how is that reported?
- Jetpur's dyeing and printing units get 84% of their energy from heat: what does the cluster burn?
- Jodhpur lime units burn pet coke: what is their CO2, including what comes from the limestone?
- Jorhat tea factories dry leaf on coal or gas: how much, and what does a buyer's carbon figure need?
- Karnal's chemical profile gives a typical other-chemicals unit as 114.92 tonnes of oil equivalent (toe) a year, yet a heat range of 132 to 474 toe: which is my benchmark if I run a coal boiler?
- Karnal's chemical units run mostly on coal and LDO: what is the footprint per tonne?
- LPG or PNG for a furnace or boiler: which emits less CO2 for the same heat?
- My bulk diesel invoice is in kilolitres at 15 C. How do I get the right litres and CO2?
- My buyer asks for a base year and my bank asks for a baseline. Does the Greenhouse Gas Protocol treat them as the same?
- My buyer wants carbon per kg, but we track it per piece. How do we convert?
- My buyer's emissions form wants metric tonnes CO2e. What unit mistakes should I avoid?
- My DG diesel is on fuel invoices and DG units are in a log. Which do I count?
- My DG set has no fuel log. How do I estimate diesel use from run hours?
- My discom green requisition is fixed for a year. What do I claim in a month when my factory uses less than the green quantity?
- My electricity bill includes arrears or a supplementary bill for past months. Do those count in this month's emissions?
- My electricity bill is in kVAh. How do I calculate emissions?
- My electricity bill shows a fuel and power purchase adjustment surcharge. Does that change my emissions?
- My electricity bill was raised on average units because the meter was faulty. What do I use for emissions?
- My emissions went up in this year's report. How do I find out why?
- My factory has two electricity connections. Do I just add both bills?
- My factory in an SEZ or industrial park buys power from the park developer. Which emission factor applies?
- My floor has no sub-meter: how does the GHG Protocol say to estimate my share of the building's energy?
- My freight bill shows only the amount, not weight or distance. How do I estimate emissions?
- My fuel invoice shows only a rupee amount, no litres. How do I get an emissions figure?
- My gas invoice says SCM but the factor is per Nm3. Does the difference matter?
- My HT electricity bill runs to several pages with ToD slabs, demand charges and solar adjustments. Which numbers go into the carbon calculation?
- My imported coal certificate gives GCV on a GAR or NAR basis. How do I convert it to CO2?
- My imported coal invoice is priced in US dollars. How do I count its emissions?
- My invoice gives fuel in kg but the factor is per litre: how do I convert?
- My lab report gives carbon and calorific value for my petcoke or coal. How do I tell whether my own carbon dioxide factor is consistent with the Intergovernmental Panel on Climate Change default?
- My landlord has no meter for our floor but can give us its own Scope 1 and 2 totals: how do we work out our share in Scope 3 Category 8?
- My pottery unit's motors have been rewound several times: when does the Khurja profile say to replace them, and what does it save?
- My products are components sold to other manufacturers. Can I exclude downstream Scope 3?
- My report says IPCC Tier 1 default factors. Will a buyer or verifier accept that?
- My rooftop solar output drops every year. How does that affect my Scope 2 claim?
- My round-the-clock renewable supply contract includes some thermal power. How much can I count as renewable?
- My Scope 2 base year only has a location-based figure: what does the Greenhouse Gas Protocol say to add?
- My staff share cars on business trips: do I count person-km or vehicle-km?
- My steel or sugar mill burns its own lime: do I count that kiln, and can I subtract the carbon dioxide the lime takes back up?
- My supplier reported tonnes of carbon, not CO2. How do I convert it?
- My supplier's price includes delivery to my factory. Do I still count that transport in Category 4?
- My transporter bills only rupees: how do I turn freight fuel spend into litres for Scope 3?
- My US customer estimates my emissions with EPA spend-based factors. How do I give them a better figure?
- My US customer told me to use eGRID factors for my electricity. Is that right for a factory in India?
- My waste goes to landfill this year and the machines I sold will be scrapped in fifteen years: which year's Scope 3 holds those later emissions?
- Nagaur's plier and hammer makers heat on furnace oil: what is the footprint per tonne?
- Neither recycling method fits my paper product. What does the Greenhouse Gas Protocol Product Standard allow instead?
- Oil-fired crucible or induction furnace for melting brass: which emits less per kg?
- Only a quarter of staff answered our commuting survey. Can we still estimate Category 7?
- Open access green power shows on my HT bill. How do I report it in Scope 2?
- Our 11 kilovolt (kV) switchgear has never needed a gas top-up. Do we report zero sulphur hexafluoride (SF6) loss, or use an Intergovernmental Panel on Climate Change (IPCC) default?
- Our bills and invoices were lost in a fire or flood. Can we still report emissions?
- Our biomass is bought by weight but often wet. How does moisture affect our emissions figures?
- Our boiler burns only biomass. Do we still have Scope 1 emissions?
Earlier questions · More questions