Scopes, factors and calculations: questions answered
Pick the question closest to yours.
- Our buyer wants company-wide emissions, but our group has a factory and a trading arm. Is one number fair?
- Our car maker customer in Sanand wants our carbon data. What should an ancillary unit send?
- Our carbon footprint jumped after we added supplier emissions. Did we get worse?
- Our clinic or office is in a building where the landlord runs a central boiler and rooftop solar and we pay one lump rent: do we report that heat and power?
- Our coal test report shows as-received and air-dried values. Which do we use for emissions?
- Our company runs a guest house for visiting staff. Which scope do its emissions go in?
- Our container goes via a transshipment hub. How do we count the freight emissions?
- Our electricity bills are still in the old company name after a merger. Can we count them?
- Our electricity meter was replaced mid-year. How do we total the year's units?
- Our electricity use spiked in a heatwave month. How do we explain it in our report?
- Our engineers work at client sites. Whose emissions are those?
- Our factory runs only part of the year. How do we show emissions intensity fairly?
- Our first carbon footprint looks high. How do we present it to a buyer?
- Our furnace oil invoice is in litres. How do we convert it for emissions?
- Our gas meter reading does not match the PNG bill. Which do we use?
- Our Gqeberha plant supplies a European carmaker. What carbon data do they usually ask for?
- Our green open access bill shows deviation units. How do they count in Scope 2?
- Our group companies sell power, steam or freight to each other. How do we avoid counting those emissions twice?
- Our hotel is owned by one company and run by a management company: who reports its Scope 1 and Scope 2 emissions?
- Our hotel outsources laundry. Does it go in Scope 3, and how do we estimate it?
- Our IT park bills electricity, DG power and chilled water through CAM charges. How do we report that?
- Our landlord put solar on the roof of our rented factory. Who claims it?
- Our lease says the landlord runs the building and our rent includes power: can we leave that electricity out of our carbon report?
- Our new plant started in October. How do we report its emissions for the year?
- Our open access wind supply was curtailed for days. What factor do we use for those units?
- Our Oragadam plant supplies carmakers near Chennai. What carbon data should we have ready?
- Our Puebla plant supplies a German carmaker. What will their carbon request look like?
- Our rooftop solar monitoring was offline for a month. What do we do?
- Our Saltillo foundry casts engine and chassis parts. How do we give the carmaker a carbon figure?
- Our staff commute survey collects personal details. What should we watch under India's data protection law?
- Our steel mill buys coke from Shanxi. Is the coke maker's emission a CBAM precursor?
- Our stores are in malls and the landlord bills electricity. How do we get Scope 2 data?
- Our sub-meters add up to less than the main electricity meter. Which do we report?
- Our sulphur hexafluoride (SF6) cylinder stock and equipment changed during the year. How does the Intergovernmental Panel on Climate Change (IPCC) mass balance net that out?
- Our supplier moved to renewable power mid-year. How do we update our Scope 3?
- Our São Bernardo truck parts plant buys renewable certificates. How do we show Scope 2?
- Our total emissions fell but emission intensity rose. How do we explain it to a buyer?
- Our travel agent invoice shows only the fare, not the route. How do I calculate flight emissions?
- Our US buyer's template uses EPA emission factors. Should we use them for our Indian plant?
- Our verifier asked for a data flow diagram. What should it show?
- Our verifier wants calibration certificates for our meters. Which ones matter?
- Our workshop and the owner's home share one electricity meter. What do we report?
- Our year closes before some fuel invoices arrive. How do we count those emissions?
- Pali's hand process and power process units use very different energy: which records matter for each?
- Panipat's textile units burn biomass and pet coke: what is the cluster's carbon picture?
- Pune forging and heat treatment units burn oil, gas and power: what is the cluster's footprint?
- Rajkot engineering units saved real energy under a cluster programme: how does a unit prove its own saving?
- Refrigerated or desiccant air dryer: how much energy does each waste, and which should a factory use?
- Saharanpur foundries cast hand pumps on coke: what is the cluster's footprint?
- Should a chemical tanker operator count the empty return trip?
- Should a contractor count site generator diesel or the temporary grid connection?
- Should a family business group with several units use operational control or equity share for its carbon footprint?
- Should a franchisor count its franchisees' purchases, like ingredients, in Scope 3?
- Should a growing MSME set an absolute or an intensity emissions target?
- Should a seafood plant swap to screw compressors or to an ammonia and carbon dioxide system?
- Should a second person check our carbon calculations before we send them?
- Should a small MSME get an ISO 14064-1 verified inventory, or is a GHG Protocol report enough?
- Should a steel plant buying Jharia coking coal count mine methane in Scope 3?
- Should a steel plant count mine methane on coking coal from Moatize?
- Should a Surat unit fit variable frequency drives (VFD) on its stenter blowers or buy a new stenter, going by the Bureau of Energy Efficiency (BEE) reports?
- Should air freight emissions use actual weight or chargeable (volumetric) weight?
- Should an electric bus depot count charger losses in its emissions?
- Should an MSME hire a carbon consultant or prepare the footprint itself?
- Should an MSME track carbon emissions monthly or just once a year?
- Should business travel flight emissions include radiative forcing, and how much does it change the number?
- Should fleet emissions use telematics distance data or fuel invoices?
- Should freight emissions use the actual route distance or the shortest distance?
- Should I add empty container return trips to my freight emissions?
- Should I calculate Scope 3 purchased goods from purchase orders, goods receipt notes or invoices?
- Should I count fuel when it is bought or when it is used, if I hold diesel stock?
- Should I count the emissions of building or making a leased asset?
- Should I reduce the contract demand on my HT electricity connection?
- Should I restate past years when the CEA grid factor changes?
- Should I rewind a burnt motor or replace it, and what does rewinding do to efficiency and CO2?
- Should I split purchases into production and non-production when building Category 1?
- Should I switch my boiler from coal to PNG or biomass, and how much CO2 does it save?
- Should I use AR5 or AR6 GWP values for methane and other gases?
- Should I use billed units or the meter reading for my electricity emissions?
- Should I use GCV or NCV when calculating CO2 from coal, gas or oil?
- Should I use my solar inverter reading or the net meter for Scope 2?
- Should I use the CEA or the IEA grid emission factor for India?
- Should I use the IPCC 2006 Guidelines or the 2019 Refinement for fuel emission factors?
- Should our plants send fuel and power quantities to head office, or calculate the CO2 themselves?
- Should proforma invoices go into my carbon records?
- Should we count emissions from video calls and streaming at work?
- Should we count on a cleaner grid to meet our reduction target?
- Should we link staff incentives to a carbon target?
- Should we read every invoice for our footprint, or is a sample enough?
- Should we report emissions for each site or only for the whole company?
- Should we round our carbon estimates up to be safe?
- Should we use a different verifier for our carbon inventory every year?
- Should work-from-home emissions be counted in Scope 3 Category 7?
- Sihor's re-rolling mills run at about 28% of capacity: what does that do to carbon per tonne?
- Solapur textile units burn wood for their steam and hot water: what is the cluster's carbon footprint?
- Some of my sites are in countries with no certificates or contracts: how do I fill the market-based Scope 2 total?
- Some of my staff take the train on some days and drive on others. How does the Greenhouse Gas Protocol's distance-based commuting formula handle that?
- Some of our diesel was stolen. Do we still count it as our emissions?
- Some of our stores have no electricity bills. How do we estimate their emissions?
- Thane's chemical profile says heat is 73% of a unit's energy, but its own table gives 59% for its API and pharmaceutical row and 86% for other chemicals: which share do I use?
- Thane's chemical units burn more biomass than any other fuel: what does that do to their carbon figure?
Earlier questions · More questions